No comments yet
Show details · 3 sections
Tabletop familiar meets sci-fi desk toy
This adorable rock-shaped alien robot bridges the gap between sci-fi desk toys and tabletop earth elementals. The design features a chunky, textured stone exterior paired with smooth, oversized sweet eyes that capture a distinctly kawaii aesthetic.
Generated via Hunyuan3D 2.1, the file has undergone rigorous mesh repair. The result is a watertight, manifold STL with zero self-intersections. It prints flawlessly.
Optimized for MSLA resin slicing
For SLA/DLP/MSLA users, the model utilizes hollowing to achieve a 1.5–2.0 mm wall thickness. Two 2.5 mm drainage holes are strategically placed at the lowest point of the geometry. This prevents suction cup failures on the build plate and saves expensive resin.
The 46.3 MB file contains roughly 250K triangles. This density easily resolves the rough stone texture at a 0.05 mm layer height without overwhelming Chitubox or Phrozen PM3M slicers.
Orientation and FDM print guidelines
Tilt the model backward by 30 to 45 degrees during orientation. This ensures auto-generated supports for overhangs greater than 45° attach only to the back, leaving the face completely free of scarring.
Printing on FDM? Scale as needed. Use a 0.2 mm layer height and 15% gyroid infill. The chunky design minimizes bridging, making it an easy print on well-calibrated machines.
- Format
- STL binary
- File size
- 46.3 MB
- Wall thickness
- 1.5–2.0 mm (resin hollow)
- Drainage holes
- 2.5 mm diameter
- Layer height
- 0.05 mm (resin) / 0.2 mm (FDM)
- Mesh status
- Manifold, watertight
- Triangle count
- ~250,000 (estimated)